Browsing by Author "Augustino, S"

Now showing 1 - 3 of 3

Physical and strength properties of azadirachta indica, (a. Juss) Growing in Morogoro, Tanzania
(2008) Gillah, P.R; Augustino, S; Ishengoma, R.C; Nkomulwa, H.O
Physical and strength properties of Azadirachta indica growing in Morogoro, Tanzania were determined and the results compared with already known properties of timber of the same family. The properties determined included basic density, bending strength, stiffness, work to maximum load, total work, compression and shear parallel to the grain and cleavage strength. A total of 160 test samples were used from three trees randomly selected from the study area. Preparations of test samples, actual testing and determination of different properties were carried out following standard methods. All strength property values were adjusted to 12% moisture content. Results showed A. indica to have a mean basic density of 646 kg m- 3, classified as high density timber, comparable to that of Khaya anthotheca and Trichilia emetica from the same family. The overall strength properties of A. indica are lower compared to those of K. anthotheca and T. emetica, however, superior in terms of cleavage strength. Based on the studied properties, the species can successfully substitute K. anthotheca and T. emetica in uses which require high bending, cleavage and shear parallel to the grain strengths. A. indica wood is therefore recommended for uses other than fuel wood and poles such as making furniture, tool handles, artificial limbs, joinery and plywood.
Potentials of lesser known and lesser utilized indigenous agroforestry Timbers in Kilosa district, Morogoro Tanzania
(2015) Makonda, F.B.S.; Augustino, S; Gillah, P.R; Ishengoma, R.C; Kitojo, D.H; Ruffo, C; Eriksen, S; Msanga, H.P
The paper presents baseline results of gathered important information for inference in establishing optimal production and utilization of Lesser-known (LK) and Lesser-utilized (LU) indigenous agro- forestry timber species (IAGTS) in improving incomes of rural communities in Kilosa District. The main key questions were: what are the characteristics of the sites for establishing LK and LU IAGTS; who are the main actors in establishing LK and LU IAGTS; what are LK and LU IAGTS and other species for establishment in the study area and what are the strengths, weaknesses, opportunities and threats for establishing LK and LU IAGTS in the study area. Data collection was participatory, involving key stakeholders, participants’ observations and literature surveys. A total of eight villages were identified as potential sites for nursery establishment with seven main actors’ mostly local communities engaged in tree planting activities under associations. Five priority LK and LU IAGTS were identified and selected for nursery establishment. These were: Lonchocarpus capassa (Mfumbili), Sclerocarya birrea (Mng’ongo), Vitex doniana (Mfudu), Pseudolachnostylis maprouneifolia (Msolo) and Combretum zeyheri (Mlama mweupe). The strengths and opportunities favouring the establishment of LK and LU IAGTS nurseries were identified, with a few weaknesses and threats which needed to be worked upon.
Variation of basic density and fibre length in lonchocarpus Capassa (rolfe) wood from Kilosa district, Tanzania
(Tanzania Journal of Forestry and Nature Conservation, 2016) Kayumba, I; Iddi, S; Augustino, S; Makonda, F.B.S
Within tree radial and axial variations of wood basic density and fibre length of Lonchocarpus capassa (Rolfe) were investigated using three mature defect free trees from Kilosa District, Tanzania. Samples for determination of wood basic density and fibre length were collected from the butt, the middle and the tip of the stem height and six radial positions. Wood basic density and fibre length were determined following standard procedures. The average wood basic density and fibre length were 569.3 kg m -3 and 1.38 mm, respectively. Statistical analysis indicated that stem height and radial positions had significant effect on wood density and fibre length. There was no positive linear relationship between wood basic density and fibre length. Based on density, the wood of L. capassa is heavy and is more or less comparable to that of Khaya anthotheca. The two species can therefore be used exchangeably if wood density is the only pre-requisite. Normally, heavy timbers are suitable for wood fuel from their high calorific values. The fibres of L. capassa are longer than those of the commonly used species in pulp and paper production in Tanzania, showing the potential of L. capassa for being used in pulp and paper making.